Articles from last issue

• Research Article
  
  Wash fastness properties of pre-mordanting cotton fabrics dyed with natural dyes, 1-17

  Halil İbrahim Turgut - Begüm Selçuk Elgün - Özlem Yarar

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Elektrikli araçlar için MPPT tabanlı yüksek verimli batarya şarj sistemi tasarımı, 18-37
  Design of a high-efficiency battery charging system based on MPPT for electric vehicles

  Leyla Arslan -Harun Özbay

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Türk tekstil ve hazır giyim sektörü inovasyon sisteminin güncel durumu, 38-58
  The current status of the Turkish textile and apparel sector's innovation system

  Aslı Balçak Girgin -Yusuf Ulcay

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Oleik asit/nişasta/grafit temelli kompozit faz değiştiren malzemelerin hazırlanması ve ısıl özelliklerinin incelenmesi, 59-72
  Preparation of oleic acid/starch/graphite based composite phase change materials and investigation of their thermal properties

  Mehmet Selçuk Mert -Hatice Hande Mert -Sude Yaldız -Fikret Yüksel

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Parke taşı üretiminde kükürt polimer beton kullanımının araştırılması, 73-83
  Investigation of the use of sulfur polymer concrete in paving stone production

  Onur Öztürk -Adnan Öner

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Catching the biogas opportunity: Determining the animal waste-based biogas potential and environmental effects for Sirnak, 84-97

  Dilek Gündüz -Ezgi Bayrakdar Ateş

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  The flexural and compressive properties of sandwich composites with different 3D-printed core structures, 98-112

  Rabia Caran -Ayten Yüksel -Necati Ercan -Doruk Erdem Yunus -Ayşe Çelik Bedeloğlu

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Siber ağların risk analizi: Saldırı-savunma ağaçlarıyla temellendirilmiş niceliksel bir yaklaşım, 113-125
  Risk analysis of cyber networks: a quantitative approach based on attack-defense trees

  Mehmet Ertem -İlker Özçelik

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Carbon nanotube reinforced LDPE/SAN thermoplastic nanocomposites: thermo-mechanical and electromagnetic interference shielding properties, 126-137

  Onur Divan -Ferhat Yıldırım -Volkan Eskizeybek

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Path planning of autonomous mobile robots based on Voronoi diagram and ant colony optimization, 138-146

  Adem Tuncer

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Tarımsal mekanizasyonda kullanılan 30MnB5 bor çeliğinin kaynak sonrası soğutma rejiminin mekanik ve mikroyapı özelliklerine etkisi, 147-161
  Effect of post-welding cooling regime on mechanical and microstructure properties of 30MnB5 boron steel used in agricultural mechanisation

  Bekir Çevik

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Strategic Solvent System Tuning for the Development of PVDF and TPU Nanofibers, 162-174

  Ömer Faruk Ünsal -Ayşe Çelik Bedeloğlu

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  SG2 düşük alaşımlı ilave metal kullanılarak tel ark eklemeli imalat yöntemi ile üretilen silindirik parçanın mekanik özelliklerinin araştırılması, 175-187
  Investigation of the mechanical properties of cylindrical part produced by wire arc additive manufacturing method using SG2 low alloy filler metal

  Kürşat Uygar Altun -Ercan Çağlar -Yusuf Ayan -Nizamettin Kahraman

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Piezoelectric performance of co-axial electrospun PVDF/TPU nanofiber mats, 188-197

  İsmail Borazan

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Determination of optimal cross-section dimensions of rectangular hollow sections under oblique bending: analytical and numerical study, 198-219

  Mirali Nuraliyev -Mehmet Akif Dündar

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Enhancing filtration performance with layered and bimodal nanofiber structures, 220-231

  Ali Toptaş -Ali Kılıç -Ali Demir

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Examination and Improvement of Direction-Dependent Surface Properties in Composite Structures Produced by the Fused Depostion Modelling Method, 232-244

  Özlem Doğru -Alperen Doğru -Mehmet Özgür Seydibeyoğlu

  • Share

    
  • Abstract
  • Full text

• Research Article
  
  Optimal defense strategies against intelligent cyber attacks, 245-262

  Mehmet Ertem -Vicki M. Bier

  • Share

    
  • Abstract
  • Full text