Journal of Innovative Engineering and Natural Science
Editor : İdris Karagöz
Assistant Editor : Yasemin Balçık Tamer
Publication Place : Yalova
Year-Number : 2024 - 1
Articles for this issue
Research ArticleWash fastness properties of pre-mordanting cotton fabrics dyed with natural dyeṡ, 1-17
Halil İbrahim Turgut
- Begüm Selçuk Elgün - Özlem Yarar
Elektrikli araçlar için MPPT tabanlı yüksek verimli batarya şarj sistemi tasarımı̇, 18-37
Design of a high-efficiency battery charging system based on MPPT for electric vehicles
Leyla Arslan
-Harun Özbay
Türk tekstil ve hazır giyim sektörü inovasyon sisteminin güncel durumu̇, 38-58
The current status of the Turkish textile and apparel sector's innovation system
Aslı Balçak Girgin
-Yusuf Ulcay
Oleik asit/nişasta/grafit temelli kompozit faz değiştiren malzemelerin hazırlanması ve ısıl özelliklerinin incelenmesi̇, 59-72
Preparation of oleic acid/starch/graphite based composite phase change materials and investigation of their thermal properties
Mehmet Selçuk Mert
-Hatice Hande Mert -Sude Yaldız -Fikret Yüksel
Parke taşı üretiminde kükürt polimer beton kullanımının araştırılması̇, 73-83
Investigation of the use of sulfur polymer concrete in paving stone production
Onur Öztürk
-Adnan Öner
Catching the biogas opportunity: Determining the animal waste-based biogas potential and environmental effects for Sirnak̇, 84-97
Dilek Gündüz
-Ezgi Bayrakdar Ateş
The flexural and compressive properties of sandwich composites with different 3D-printed core structureṡ, 98-112
Rabia Caran
-Ayten Yüksel -Necati Ercan -Doruk Erdem Yunus -Ayşe Çelik Bedeloğlu
Siber ağların risk analizi: Saldırı-savunma ağaçlarıyla temellendirilmiş niceliksel bir yaklaşıṁ, 113-125
Risk analysis of cyber networks: a quantitative approach based on attack-defense trees
Mehmet Ertem
-İlker Özçelik
Carbon nanotube reinforced LDPE/SAN thermoplastic nanocomposites: thermo-mechanical and electromagnetic interference shielding propertieṡ, 126-137
Onur Divan
-Ferhat Yıldırım -Volkan Eskizeybek
Research Article
Research Article
Strategic Solvent System Tuning for the Development of PVDF and TPU Nanofiberṡ, 162-174
Ömer Faruk Ünsal
-Ayşe Çelik Bedeloğlu
SG2 düşük alaşımlı ilave metal kullanılarak tel ark eklemeli imalat yöntemi ile üretilen silindirik parçanın mekanik özelliklerinin araştırılması̇, 175-187
Investigation of the mechanical properties of cylindrical part produced by wire arc additive manufacturing method using SG2 low alloy filler metal
Kürşat Uygar Altun
-Ercan Çağlar -Yusuf Ayan -Nizamettin Kahraman
Research Article
Determination of optimal cross-section dimensions of rectangular hollow sections under oblique bending: analytical and numerical studẏ, 198-219
Mirali Nuraliyev
-Mehmet Akif Dündar
Enhancing filtration performance with layered and bimodal nanofiber structureṡ, 220-231
Ali Toptaş
-Ali Kılıç -Ali Demir
Examination and Improvement of Direction-Dependent Surface Properties in Composite Structures Produced by the Fused Depostion Modelling Methoḋ, 232-244
Özlem Doğru
-Alperen Doğru -Mehmet Özgür Seydibeyoğlu