• ISSN: 2791-7630
  • Sign in
  • New User
  • English
  • Home page
  • Aims and Scope
  • Publication Policy
  • Editorial Board
  • Submission Guidelines
  • Guidelines for Reviewers and Authors
  • Research and Publishing Ethics
  • Indexes
  • Accepted Papers
  • Publisher Information
  • Contact
Optimal defense strategies against intelligent cyber attackṡ, 245-262
Mehmet Ertem -Vicki M. Bier
  • Abstract
  • Full text

Examination and Improvement of Direction-Dependent Surface Properties in Composite Structures Produced by the Fused Depostion Modelling Methoḋ, 232-244
Özlem Doğru -Alperen Doğru -Mehmet Özgür Seydibeyoğlu
  • Abstract
  • Full text

Enhancing filtration performance with layered and bimodal nanofiber structureṡ, 220-231
Ali Toptaş -Ali Kılıç -Ali Demir
  • Abstract
  • Full text

Determination of optimal cross-section dimensions of rectangular hollow sections under oblique bending: analytical and numerical studẏ, 198-219
Mirali Nuraliyev -Mehmet Akif Dündar
  • Abstract
  • Full text

SG2 düşük alaşımlı ilave metal kullanılarak tel ark eklemeli imalat yöntemi ile üretilen silindirik parçanın mekanik özelliklerinin araştırılması̇, 175-187
Investigation of the mechanical properties of cylindrical part produced by wire arc additive manufacturing method using SG2 low alloy filler metal
Kürşat Uygar Altun -Ercan Çağlar -Yusuf Ayan -Nizamettin Kahraman
  • Abstract
  • Full text

Strategic Solvent System Tuning for the Development of PVDF and TPU Nanofiberṡ, 162-174
Ömer Faruk Ünsal -Ayşe Çelik Bedeloğlu
  • Abstract
  • Full text

Tarımsal mekanizasyonda kullanılan 30MnB5 bor çeliğinin kaynak sonrası soğutma rejiminin mekanik ve mikroyapı özelliklerine etkisi̇, 147-161
Effect of post-welding cooling regime on mechanical and microstructure properties of 30MnB5 boron steel used in agricultural mechanisation
Bekir Çevik
  • Abstract
  • Full text

Path planning of autonomous mobile robots based on Voronoi diagram and ant colony optimizatioṅ, 138-146
Adem Tuncer
  • Abstract
  • Full text

Carbon nanotube reinforced LDPE/SAN thermoplastic nanocomposites: thermo-mechanical and electromagnetic interference shielding propertieṡ, 126-137
Onur Divan -Ferhat Yıldırım -Volkan Eskizeybek
  • Abstract
  • Full text

Siber ağların risk analizi: Saldırı-savunma ağaçlarıyla temellendirilmiş niceliksel bir yaklaşıṁ, 113-125
Risk analysis of cyber networks: a quantitative approach based on attack-defense trees
Mehmet Ertem -İlker Özçelik
  • Abstract
  • Full text

The flexural and compressive properties of sandwich composites with different 3D-printed core structureṡ, 98-112
Rabia Caran -Ayten Yüksel -Necati Ercan -Doruk Erdem Yunus -Ayşe Çelik Bedeloğlu
  • Abstract
  • Full text

Catching the biogas opportunity: Determining the animal waste-based biogas potential and environmental effects for Sirnak̇, 84-97
Dilek Gündüz -Ezgi Bayrakdar Ateş
  • Abstract
  • Full text

Parke taşı üretiminde kükürt polimer beton kullanımının araştırılması̇, 73-83
Investigation of the use of sulfur polymer concrete in paving stone production
Onur Öztürk -Adnan Öner
  • Abstract
  • Full text

Oleik asit/nişasta/grafit temelli kompozit faz değiştiren malzemelerin hazırlanması ve ısıl özelliklerinin incelenmesi̇, 59-72
Preparation of oleic acid/starch/graphite based composite phase change materials and investigation of their thermal properties
Mehmet Selçuk Mert -Hatice Hande Mert -Sude Yaldız -Fikret Yüksel
  • Abstract
  • Full text

Türk tekstil ve hazır giyim sektörü inovasyon sisteminin güncel durumu̇, 38-58
The current status of the Turkish textile and apparel sector's innovation system
Aslı Balçak Girgin -Yusuf Ulcay
  • Abstract
  • Full text

Elektrikli araçlar için MPPT tabanlı yüksek verimli batarya şarj sistemi tasarımı̇, 18-37
Design of a high-efficiency battery charging system based on MPPT for electric vehicles
Leyla Arslan -Harun Özbay
  • Abstract
  • Full text

Wash fastness properties of pre-mordanting cotton fabrics dyed with natural dyeṡ, 1-17
Halil İbrahim Turgut - Begüm Selçuk Elgün - Özlem Yarar
  • Abstract
  • Full text

Wash fastness properties of pre-mordanting cotton fabrics dyed with natural dyeṡ, 1-17
Halil İbrahim TURGUT -Begüm SELÇUK ELGÜN -Özlem YARAR
  • Abstract
  • Full text

Contact Us

jiens@jiens.org

+90 226 815 6181

E-Mail Subscription

By subscribing to E-Newsletter, you can get the latest news to your e-mail.

Menu

Home page

About Us

News

Contact

Journal of Innovative Engineering and Natural Science